[Dev] Feathercoin - P2Pool-Neoscrypt - Now Available

wrapper

Great work guys!

lizhi

oh, it not work :-

Wellenreiter

I spend half a day on the p2pool stuff again
no results
what I noticed is, that the p2pool neoscrypt module produces wrong results while the same code runs fine in the wallet, so it may be ‘just’ a problem of function calls and parameter transfer between python and C++.

also if I read it right, the Wallet code passes variables to the neoscrypt procedure, as in GetPowHash() in main.h, while the python passes pointer to structures??

Eample from wallet main.h:

/* Calculates block proof-of-work hash using either NeoScrypt or Scrypt */
uint256 GetPoWHash() const {
unsigned int profile = 0x0;
uint256 hash;

/* All blocks generated up to this time point are Scrypt only */
if((fTestNet && (nTime < nTestnetSwitchV2)) ||
(!fTestNet && (nTime < nSwitchV2))) {
profile = 0x3;
} else {
/* All these blocks must be v2+ with valid nHeight */
int nHeight = GetBlockHeight();
if(fTestNet) {
if(nHeight < nTestnetFork)
profile = 0x3;
} else {
if(nHeight < nForkFour)
profile = 0x3;
}
}

neoscrypt((unsigned char *) &nVersion, (unsigned char *) &hash, profile);

return hash;
}

Example from p2pool/work.py:

 
pow_hash = self.node.net.PARENT.POW_FUNC(bitcoin_data.block_header_type.pack(header))

Where header is a dict in python.

uncle_muddy

Wellen,

I’m at the same point as you now :(

I get everything looking like it’s running well but nothing is accepted by the wallet, I’ll keep pluggin away but I’m some what in the dark here as my coding skills are limited in this area :(

UM

Wellenreiter

The miner says ’ hash accepted’ , but in the p2pool log you will see entries like ‘worker xyz submitted share with hash > target’

lizhi

I spend half a day on the p2pool stuff again
no results
what I noticed is, that the p2pool neoscrypt module produces wrong results while the same code runs fine in the wallet, so it may be ‘just’ a problem of function calls and parameter transfer between python and C++.

also if I read it right, the Wallet code passes variables to the neoscrypt procedure, as in GetPowHash() in main.h, while the python passes pointer to structures??

Eample from wallet main.h:
/* Calculates block proof-of-work hash using either NeoScrypt or Scrypt */
uint256 GetPoWHash() const {
unsigned int profile = 0x0;
uint256 hash;

/* All blocks generated up to this time point are Scrypt only */
if((fTestNet && (nTime < nTestnetSwitchV2)) ||
(!fTestNet && (nTime < nSwitchV2))) {
profile = 0x3;
} else {
/* All these blocks must be v2+ with valid nHeight */
int nHeight = GetBlockHeight();
if(fTestNet) {
if(nHeight < nTestnetFork)
profile = 0x3;
} else {
if(nHeight < nForkFour)
profile = 0x3;
}
}

neoscrypt((unsigned char *) &nVersion, (unsigned char *) &hash, profile);

return hash;
} 
Example from p2pool/work.py:
 
pow_hash = self.node.net.PARENT.POW_FUNC(bitcoin_data.block_header_type.pack(header))
Where header is a dict in python.

I think it is in main.py.

if share.pow_hash

Wellenreiter

For testing I temporarily modified the neoscrypt.c of the p2pool neoscrypt module and defined the input value of the hashing procedure as constant in the c-code. It seems to calculate correctly.

Also the target on p2pool measured against seems to be fine.

I assume, that the return value from the neoscrypt module either has an overflow or is interpreted wrong. may be wrong type, little/big endian problem or whatever.

------------- Edit---------------

Checked type of pow_hash and target in work.py -> both variables have type ‘long’

ghostlander

If you switch CPUminer in debug mode with -D, you can see P2Pool asking for incorrect targets:

[2014-08-10 21:21:12] 1 miner threads started, using 'neoscrypt' algorithm.
[2014-08-10 21:21:15] Long-polling activated for http://prometheus.phoenixcoin.org:20554/long-polling
[2014-08-10 21:21:15] DEBUG: got new work in 3062 ms
[2014-08-10 21:21:16] DEBUG (little endian): hash

Wellenreiter

It is working now for long-poll.

No support for stratum at the moment, even if work is distributed, no valid blocks can be mined via stratum.

A new version is on github

lizhi

Yes, It work! >:D

wrapper

neoscrypt p2pool dev testing cpu mine phoenixcoin

http://95.85.57.10:10554

Longpoll works, so start minerd with ‘–no-stratum’

useing Ghostlander’s Github (for minerd)

https://github.com/g…r-neoscrypt.git

lizhi

Latest code pushed

git clone git://github.com/wellenreiter01/p2pool-neoscrypt

wrapper

What is the status of the p2pool?

Is there still a problem with stratum?

Are we near to pushing some changes upstream? How far back can that go?

That makes things easier running multicoin p2pools. That will mean the “central p2pool” distribution gets updated.

Wellenreiter

Stratum suport still is not implemented, but longpoll runs stable, so this is not a show stopper for pooled neoscrypt mining.

Due to the fact, that neoscrypt uses little endian data only, while other algorithms use big endian encoding, neoscrypt p2pool is not compatible with non-neoscrypt coins.

Therefore two different versions of p2pool will exist in the futute, unless significant changes in the code is done to implement coin dependent encoding of data. These changes would need a couple of if-then clauses reducing the speed of p2pool operation, and/or increasing the load put un the underlaying host system.

Another solutution would be to adapt neoscrypt to the big endian encoding used for other algorithms, but this would mean another hard fork for any coin productive with neoscrypt.

Wellenreiter

Update:

Stratum support works for minerd.

It can be testet on

http://p2pool.neoscrypt.de:10554 ( German pool )
http://pool20.neoscrypt.de:10554 ( Dutch pool )

GPU miner adaption is ongoing, but not working yet

lizhi

Yay!!!

http://pool.ftc-c.com:19328 (china pool ) :)

Stratum support works for minerd.

CGminer Command Line:

cgminer.exe --neoscrypt --worksize 256,256,256 --thread-concurrency 8960,8960,4000 -I 12,12,12 -g 1 -o stratum+tcp://pool.ftc-c.com:19328 -u TRsuTqxAMKZNvC7JzGNgvM49rkQNcxqjhi -p x

Wellenreiter

Update:

Thanks to the help of Avehre, p2pool now fully supports stratum for cpuminer and gpuminer. ;D O0 8)

Latest Version is on github.

p2pool.neoscrypt.de:10554 (46.4.0.101:10554) is already updated and supporting stratum for gpuminer

pool20.neoscrypt.de:10554 (95.85.58.10:10554) will be updated soon.

Please be aware, that you also need the latest beta-Version of gpuminer to use stratum successfully

wrapper

Another solution would be to adapt neoscrypt to the big endian encoding used for other algorithms, but this would mean another hard fork for any coin productive with neoscrypt.

This is actually a good idea to consider for the Feathercoin implementation of neoscrypt - as it would mean pxc and ftc don’t end up like ltc and ftc with scrypt. e.g. big player coin switch over attacks …

It won’t be a hard fork, because ftc hasn’t implemented it. i.e. with some thought it might be possible to retain each format as an option (without too much work).

Additional advantages would be -

It would be possible to have different “colours of neoscrypt” for different coins to use so ASICS are harder (e.g. switchable).

pxc or ftc would have an easy switch mechanism to extend ASIC avoidance.

darksaber

Hey All,

New to the forum, but have been following the development of the p2pool for neoscrypt. I am having some difficult that I’m hoping someone can shed some light on. I am able to get the latest p2pool up and running but it is not able to sync with other nodes or download shares. (I have to change persist to False and run it as a solo)

I have edited the network.py file to add in nodes: 95.85.57.10 and 46.4.0.101. (Both running p2pool nodes). It finds and connects to them, but seems to only find a few shares. In fact if you look at the stats for each of them 95.85.57.10:10554 and 46.4.0.101:10554, they are not synced either, though clearly on the same blockchain for PXC. I have noticed other nodes show up in the logs and have connected to them and they seem to have the same problem.

I have tried different p2p ports (10555 & 11555), disabling firewall, DMZ, different flavors of linux, etc, still can’t sync.

I know it’s not on their end because when I fire up an old version of p2pool (git commit from about 2 weeks ago) it connects to both those nodes and downloads all the shares in mere seconds (of course there is no stratum support on this earlier version).

I have reviewed the code changes but can’t find anything that would affect syncing.

Any ideas?

lizhi

After I had installed PXC-P2Pool from https://github.com/wellenreiter01/p2pool-neoscrypt

Now ,I have a problem, miner can not work. @Wellenreiter , Are your code latest in github ?

cgminer.exe --neoscrypt -I 12,12 --worksize 256,256 --thread-concurrency 5760,8960  -g 1 -o stratum+tcp://pool.ftc-c.com:11554 -u PfF9PKBjkmz7gFAkA7h6ajY5AHc9B1mijW -p x

 [2014-09-13 11:43:41] No servers were found that could be used to get work from.
 [2014-09-13 11:43:41] Please check the details from the list below of the servers you have input
 [2014-09-13 11:43:41] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
 [2014-09-13 11:43:41] Pool: 0  URL: http://pool.ftc-c.com:11554  User: PfF9PKBjkmz7gFAkA7h6ajY5AHc9B1mijW  Password: x
 [2014-09-13 11:43:41] Press any key to exit, or cgminer will try again in 15s.



minerd -a neoscrypt -t 1 -o http://pool.ftc-c.com:11554 -u PfF9PKBjkmz7gFAkA7h6ajY5AHc9B1mijW -p x

[2014-09-13 12:35:31] getblocktemplate failed, falling back to getwork
[2014-09-13 12:35:31] JSON-RPC call failed: {
   "message": "p2pool is downloading shares",
   "data": null,
   "code": -12345
}
[2014-09-13 12:35:31] Starting Stratum on stratum+tcp://pool.ftc-c.com:11554
[2014-09-13 12:35:31] stratum_recv_line failed
[2014-09-13 12:35:31] ...retry after 30 seconds

The command run p2pool

python run_p2pool.py --net phoenixcoin  --bitcoind-p2p-port 9555 --bitcoind-rpc-port 9554 p2pool PoAzL52WzHRJovA6kZkptwVTdX9xMxPkwi

p2pool.log

tail: p2p-pxc.log: file truncated
2014-09-13 10:46:33.743547 p2pool (version 13.4-29-gd936671)
2014-09-13 10:46:33.743850 
2014-09-13 10:46:33.744008 Testing bitcoind RPC connection to 'http://127.0.0.1:9554/' with username 'p2pool'...
2014-09-13 10:46:33.760616     ...success!
2014-09-13 10:46:33.760841     Current block hash: 93a7ea6404be1de8f5112d17248d854be1a7f3044e674a58fa69c41228140b64
2014-09-13 10:46:33.760991     Current block height: 430093
2014-09-13 10:46:33.761119 
2014-09-13 10:46:33.761262 Testing bitcoind P2P connection to '127.0.0.1:9555'...
2014-09-13 10:46:33.843282     ...success!
2014-09-13 10:46:33.843539 
2014-09-13 10:46:33.843739 Determining payout address...
2014-09-13 10:46:33.843999     Loaded cached address: PoAzL52WzHRJovA6kZkptwVTdX9xMxPkwi...
2014-09-13 10:46:33.848390     ...success! Payout address: PoAzL52WzHRJovA6kZkptwVTdX9xMxPkwi
2014-09-13 10:46:33.848541 
2014-09-13 10:46:33.848688 Loading shares...
2014-09-13 10:46:33.848983     ...done loading 0 shares (0 verified)!
2014-09-13 10:46:33.849113 
2014-09-13 10:46:33.849242 Initializing work...
2014-09-13 10:46:33.881213     ...success!
2014-09-13 10:46:33.881423 
2014-09-13 10:46:33.881591 Joining p2pool network using port 11555...
2014-09-13 10:46:33.883949     ...success!
2014-09-13 10:46:33.884095 
2014-09-13 10:46:33.885169 Listening for workers on '' port 11554...
2014-09-13 10:46:33.945528     ...success!
2014-09-13 10:46:33.945717 
2014-09-13 10:46:33.945853 Started successfully!
2014-09-13 10:46:33.945985 Go to http://127.0.0.1:11554/ to view graphs and statistics!
2014-09-13 10:46:33.946133 Donating 1.0% of work towards P2Pool's development. Thank you!
2014-09-13 10:46:33.946264 You can increase this amount with --give-author argument! (or decrease it, if you must)
2014-09-13 10:46:33.946401 
2014-09-13 10:46:34.817044 Outgoing connection to peer 46.4.0.101:11555 established. p2pool version: 1300 '5b90f6c'
2014-09-13 10:46:37.555298 Peer 115.28.24.213:11555 misbehaving, will drop and ban. Reason: was connected to self
2014-09-13 10:46:37.556110 Peer 115.28.24.213:49517 misbehaving, will drop and ban. Reason: was connected to self
2014-09-13 10:46:39.064048 > Error in DeferredResource handler:
2014-09-13 10:46:39.064319 > Traceback (most recent call last):
2014-09-13 10:46:39.064480 >   File "/data/ftcc/p2pool-neoscrypt/p2pool/util/deferred_resource.py", line 24, in render
2014-09-13 10:46:39.064635 >     defer.maybeDeferred(resource.Resource.render, self, request).addCallbacks(finish, finish_error)
2014-09-13 10:46:39.064779 >   File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 134, in maybeDeferred
2014-09-13 10:46:39.065134 >     result = f(*args, **kw)
2014-09-13 10:46:39.065324 >   File "/usr/lib/python2.7/dist-packages/twisted/web/resource.py", line 216, in render
2014-09-13 10:46:39.065497 >     return m(request)
2014-09-13 10:46:39.065644 >   File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 1181, in unwindGenerator
2014-09-13 10:46:39.065787 >     return _inlineCallbacks(None, gen, Deferred())
2014-09-13 10:46:39.065927 > ---  ---
2014-09-13 10:46:39.066056 >   File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 1039, in _inlineCallbacks
2014-09-13 10:46:39.066179 >     result = g.send(result)
2014-09-13 10:46:39.066300 >   File "/data/ftcc/p2pool-neoscrypt/p2pool/web.py", line 189, in render_GET
2014-09-13 10:46:39.066434 >     res = yield self.func(*self.args)
2014-09-13 10:46:39.066571 >   File "/data/ftcc/p2pool-neoscrypt/p2pool/web.py", line 194, in 
2014-09-13 10:46:39.066694 >     web_root.putChild('rate', WebInterface(lambda: p2pool_data.get_pool_attempts_per_second(node.tracker, node.best_share_var.value, decent_height())/(1-p2pool_data.get_average_stale_prop(node.tracker, node.best_share_var.value, decent_height()))))
2014-09-13 10:46:39.066820 >   File "/data/ftcc/p2pool-neoscrypt/p2pool/data.py", line 553, in get_pool_attempts_per_second
2014-09-13 10:46:39.066963 >     assert dist >= 2
2014-09-13 10:46:39.067076 > exceptions.AssertionError: 
2014-09-13 10:46:41.764990 Outgoing connection to peer 95.85.57.10:11555 established. p2pool version: 1300 '13.4-22-g0c7c431-dirty'
2014-09-13 10:46:44.668822 Skipping from block 93a7ea6404be1de8f51

phoenixcoin.conf

rpcuser=p2pool
rpcpassword=PoAzL52WzHRJovA6kZkptwVTdX9xMxPkwi
daemon=1
server=1
rpcport=9554
port=9555