[Solved] Compile issues with a Feathercoin Fork
-
I’m not sure quite what to say, it would be impossible for even Albert Einstein to diagnose a problem without the relevant information.
I pointed out we need to know what was done and the output to help, it turns out it wasn’t even a Feathercoin build? ¯_(ツ)_/¯
- If you point us to the Github, and give us the output, someone might be able to help.
- The subject should have been brought up in an “Off Topic” thread, or at least in “Support” with the full details of which coin it is. Members have helped other coins before (Litecoin, Phoenixcoin, Catcoin, UFOcoin, etc)
- You could apply to add a Coin-Qt in the Alternative coins section of the forum and build up some community support there.
-
this is a new coin that has not been released or announced yet, but the coin itself doesnt matter, when i first made this thread i was working on voxels which was using the feathercoin source code, but because of that zxing error the dev switched the source code to something that was easier for me to compile but now i have someone asking me to do a wallet using this source again and i still cant figure out how to add zxing to my deps for compiling so that the ./configure option will see it
i guess my main question is how do i get my compiler (mingw/msys) or the ./configure to look for and find zxing so it can be used
-
@ironsniper said in compile issues:
i guess my main question is how do i get my compiler (mingw/msys) or the ./configure to look for and find zxing so it can be used
http://forum.feathercoin.com/topic/8570/dev-release-candidate-feathercoin-0-9-3-2-check-list/34
check that post I made for replicating in Ubuntu, read the whole thing but please use the 0.9.3.1 if you’re going to test with Feathercoin. I gave instructions for libzxing
-
@aciddude said in compile issues:
@ironsniper said in compile issues:
i guess my main question is how do i get my compiler (mingw/msys) or the ./configure to look for and find zxing so it can be used
http://forum.feathercoin.com/topic/8570/dev-release-candidate-feathercoin-0-9-3-2-check-list/34
check that post I made for replicating in Ubuntu, read the whole thing but please use the 0.9.3.1 if you’re going to test with Feathercoin. I gave instructions for libzxing
is that for compiling for windows or linux? cause i am compiling for windows on windows not linux
-
@ironsniper said in compile issues:
@aciddude said in compile issues:
@ironsniper said in compile issues:
i guess my main question is how do i get my compiler (mingw/msys) or the ./configure to look for and find zxing so it can be used
http://forum.feathercoin.com/topic/8570/dev-release-candidate-feathercoin-0-9-3-2-check-list/34
check that post I made for replicating in Ubuntu, read the whole thing but please use the 0.9.3.1 if you’re going to test with Feathercoin. I gave instructions for libzxing
is that for compiling for windows or linux? cause i am compiling for windows on windows not linux
Yep I see that. Just worth pointing out even when I had the zxing folder in my source it was still looking for two other files… Maybe windows is doing something similar ?
-
@aciddude so you put the zxing into the source for the wallet? does it go in any particular folder or? maybe thats why it cant find it, cause i have no idea if i have the correct files for zxing or if i am evern putting them in the correct place as i cannot find anything coins besides feather that has this thing
-
What is the feathercoin code base/github/branch you used to fork the new coin and did you change any of the .m4 files or files under the diffenrent m4 directories?
With the feathercoin code base I can check the FTC configure script and the ac-files and if we have the same bug there, I probably can fix it, in a way, that you can disable qr support and compile the gui
-
@Wellenreiter said in compile issues:
What is the feathercoin code base/github/branch you used to fork the new coin and did you change any of the .m4 files or files under the diffenrent m4 directories?
With the feathercoin code base I can check the FTC configure script and the ac-files and if we have the same bug there, I probably can fix it, in a way, that you can disable qr support and compile the gui
i have no idea what version atm, the person gave me access to a private github with the source and just asked me to try and do a compile
-
You will understand, that is is nearly impossible to help without the code we are talking about :(
Sorry
-
@Wellenreiter said in compile issues:
You will understand, that is is nearly impossible to help without the code we are talking about :(
Sorry
not your fault or anything, best i can do is just ask how do i put zxing into the source code or where on my computer to put it and add code some where to where when i do the configure it will see it, because the error i am getting just means my compiler is not setup correctly to work with zxing and feather coin is the only one i have EVER seen use zxing, why i dont know
-
You have all the information to fix your problem. We have had to work implementing zxing and integrating with different versions as well. …
It is an impossible black box for us to fix your problem for you.
If it is open source project make the Github public, the license does mean you need to do that at some time anyway …
-
@wrapper said in compile issues:
You have all the information to fix your problem. We have had to work implementing zxing and integrating with different versions as well. …
It is an impossible black box for us to fix your problem for you.
If it is open source project make the Github public, the license does mean you need to do that at some time anyway …
thats not up to me, i just do the compile and thats it, i didnt setup the source etc and honestly i dont have any information to fix my problem, cause all the information is linux only not windows, best way to recreate my issue is follow this guide https://bitcointalk.org/index.php?topic=149479.0 and just use updated source for openssl etc and when you get to the configure part you will get the error
-
Ok after reading the thread in bitcointalk, I suggest to try the following:
-
download and compile the libzxing code https://github.com/glassechidna/zxing-cpp
-
add the libzxing location to the compiler flags
- after compiling zxing you should have a libzxing.dll or equivalent on your system.
- add that directory to the include directories by setting CPPFLAGS and LDFLAGS as it is done for qr-code and described in the bitcoin thread use the directory containing libzxing.a or libzxin.dll as target for the -I option
Then add relevant CPPFLAGS and LDFLAGS when configuring Bitcoin:
Code:CPPFLAGS=“-I/c/deps/db-4.8.30.NC/build_unix
-I/c/deps/openssl-1.0.1l/include
-I/c/deps
-I/c/deps/protobuf-2.6.1/src
-I/c/deps/libpng-1.6.16
-I/c/deps/qrencode-3.4.4
-I/c/deps/gmp-6.0.0”
LDFLAGS=“-L/c/deps/db-4.8.30.NC/build_unix
-L/c/deps/openssl-1.0.1l
-L/c/deps/miniupnpc
-L/c/deps/protobuf-2.6.1/src/.libs
-L/c/deps/libpng-1.6.16/.libs
-L/c/deps/qrencode-3.4.4/.libs
-L/c/deps/gmp-6.0.0/.libs” \ -
run configure and make
The above is just a suggestion, how I’d try to solve the problem. I have no experience with windows compiles at all
Another try could be to star with a 0.8.7 based fork of the code. 0.8.7.X doesn’t use libzxing.
-
-
@Wellenreiter said in compile issues:
Ok after reading the thread in bitcointalk, I suggest to try the following:
-
download and compile the libzxing code https://github.com/glassechidna/zxing-cpp
-
add the libzxing location to the compiler flags
- after compiling zxing you should have a libzxing.dll or equivalent on your system.
- add that directory to the include directories by setting CPPFLAGS and LDFLAGS as it is done for qr-code and described in the bitcoin thread use the directory containing libzxing.a or libzxin.dll as target for the -I option
Then add relevant CPPFLAGS and LDFLAGS when configuring Bitcoin:
Code:CPPFLAGS=“-I/c/deps/db-4.8.30.NC/build_unix
-I/c/deps/openssl-1.0.1l/include
-I/c/deps
-I/c/deps/protobuf-2.6.1/src
-I/c/deps/libpng-1.6.16
-I/c/deps/qrencode-3.4.4
-I/c/deps/gmp-6.0.0”
LDFLAGS=“-L/c/deps/db-4.8.30.NC/build_unix
-L/c/deps/openssl-1.0.1l
-L/c/deps/miniupnpc
-L/c/deps/protobuf-2.6.1/src/.libs
-L/c/deps/libpng-1.6.16/.libs
-L/c/deps/qrencode-3.4.4/.libs
-L/c/deps/gmp-6.0.0/.libs” \ -
run configure and make
The above is just a suggestion, how I’d try to solve the problem. I have no experience with windows compiles at all
Another try could be to star with a 0.8.7 based fork of the code. 0.8.7.X doesn’t use libzxing.
well i will give that a try next time, i started extracting zxing to different places in the source code and kept trying to use the --with-qrcode=no and found out that i was not putting a \ after and did that it started to compile after i ran the ./configure, but it errored out still trying to find something from zxing for some reason, so i went back to the link posted by @aciddude and notice something about a line in a file for zxing needing to be changed from private to public and saved and now i have the wallet compiled! thank you all for your help!
-
-
@ironsniper Really glad we could help, much kudos to Wellenreiter for the “blind fix” … :)
-
@ironsniper - glad it’s sorted!
