New kid on the block here

Wellenreiter

@msxoin

probably there is a syntax error in the .bat file, or it has and extension like mine.bat.txt

There are two things you can do.

open a command line window
- menu-> run-> enter ‘cmd’

type in the same line you entered in the mine.bat file

that should start nsgminer and leave the window open if it fails, so you can read the error messages

in the command line window change to the directory containing the nsgminer.exe and mine.bat file. I hope you are familiar with the basic commands of the windows command line, so you know how to do that.

check the mine.bat file name with the command ’ dir mine*’
- if the output shows only the file name mine.bat all is ok here.
- if the output shows mine.bat.txt type in 'rename mine.bat.txt mine.bat

This should fix the extension problem and assuming that the content of mine.bat is correct, the miner should start

msxoin

@Wellenreiter I opened the command prompt, I changed the directory to where the miner is installed and copied the line. It says The system cannot find the file specified.

I also dir the folder and it shows mine.bat. Now when I open the miner, copy the pool address, hit enter in the username and password, it displays a blank black screen. If i press any key, the program turns off.

UPDATE: I managed to make it do the same as before. Same screenshots as before. Cant start GPU it says and cant find diablo.cl

Something relevant is this, but I can’t understand it.
https://forum.feathercoin.com/topic/8280/solved-diablo-cl-error-when-mining-win7/4

wrapper

Hi and welcome to alternative currency, see you are straight in the deep end.

AcidD

@msxoin

Can you post your mine.bat file ?

msxoin

@AcidD

nsgminer --neoscrypt -O <WALLET NUMBER HERE>:xx -u http://p2pool.neoscrypt.de:19327

AcidD

This post is deleted!

AcidD

@msxoin said in New kid on the block here:

@AcidD

nsgminer --neoscrypt -O <WALLET NUMBER HERE>:xx -u http://p2pool.neoscrypt.de:19327

There is an error/mitake with your line.

Please read each part or even each character or symbol and make sure it’s identical

nsgminer --neoscrypt -I 14 --worksize 16 -g 1 -o http://p2pool.neoscrypt.de:19327 -O 6tXAeBZzRrtXXv7WBypn29VMRTci5egbSw:xx

See below.
alt text

I hope this helps.

msxoin

@AcidD
Alright. Done that and things changed. However, now it says "No login credentials supplied for pool 0 http://p2pool…
Should I make an account somewhere?

wrapper

@AcidD said in New kid on the block here:

http://p2pool.neoscrypt.de:19327

Can you post what you have? What have you done and what things changed to what?

the FTC address is the password? There is no other login for p2pool.

http://p2pool.neoscrypt.de:19327

AcidD

@msxoin said in New kid on the block here:

@AcidD
Alright. Done that and things changed. However, now it says "No login credentials supplied for pool 0 http://p2pool…
Should I make an account somewhere?

p2pool does not need an account.

Are you 100% it’s all identical

You need to look at this switch:

-O

The above switch is specifying a username and password. for p2pool your “username” is your wallet address that you want the mined coins to go to…and for p2pool you don’t need a password so it’s just “xx”

So section by section in the bat file, I’m going to explain each part and hopefully you’ll be able to start. If you look at my screenshot it should make sense to you…

Here is the line we are discussing:

nsgminer --neoscrypt -I 14 --worksize 16 -g 1 -o http://p2pool.neoscrypt.de:19327 -O 6tXAeBZzRrtXXv7WBypn29VMRTci5egbSw:xx

First you start the nsgminer program by calling “nsgminer”

You then specify that you want to mine the neoscrypt algorithm with “–neoscrypt”

You then specify “intensity” with “-I 14” this is intensity 14

You then specify a “work size” with “–worksize 16”

You then specify your GPU threads with “-g 1” This means you’re going to use 1 GPU thread

You then specify your pool address with “-o URL”

You then specify your mining address and a random password that’s not needed with “-O MiningAddress:xx”

1- look at my sceenshot…look at the folder I have extracted the NSGminer software to.
2 - look at the mine.bat file I opened in notepad
3 - read bit and follow with my explanations above

msxoin

@AcidD
Alright, it seems that I had the second -O with lower case rather than capital. Now it seems connected, but still, it shows this:

AcidD

That looks ok.

Does it report a hashrate ?

If you look at this page http://p2pool.neoscrypt.de:19327/static/ and scroll down.

You should see your wallet address and your hashrate as well as your expected PayOut.

msxoin

I cant see my wallet in the website.
And for some reason, Khs started at about 180 and keeps decreasing. Currently at 50. Why is that?

UPDATE: I just saw my wallet at the website, But hash rate is unacceptable. 20khs

AcidD

Well the HD7770 is an old card…I dont expect a very high hashrate…altho 20 KH/s seems a bit low

if you use CMD and navigate to your Nsgminer folder and then run this:

nsgminer --help

it will give you a load of options, read each one and see if you can tweak your setup.

msxoin

Ok thanks a lot. Hash rate moving between 80 and 100 now.
So what happens now? Will I see the mined feathercoins in the feather program? When will they show up? I want to calculate my rate of mining, as it seems that website calclutators were terribly wrong.

AcidD

So yay! you’re mining now.

Keep checking this link, look for your wallet address…it should show you your “expected payout”
http://p2pool.neoscrypt.de:19327/static/

Then you just have to wait till the pool pays out and your expected payout will be transferred to your wallet address.

@Wellenreiter might be able to confirm how often the pool pays out.

Glad you got it sorted :slight_smile:

Wellenreiter

@msxoin said in New kid on the block here:

I cant see my wallet in the website.
And for some reason, Khs started at about 180 and keeps decreasing. Currently at 50. Why is that?

UPDATE: I just saw my wallet at the website, But hash rate is unacceptable. 20khs

The hashrate will go up if you mine a bit longer, as the pool needs more data to calculate your hash rate. IT will be the same or minimal less, than the hash rate your miner reports… if it reports… ;)

AcidD

One last step is to make sure your Feathercoin desktop wallet is fully synced.

If you look at the screenshot below of my test wallet.

You can see the big green bar at the bottom that says “5 weeks behind”

What this means is that my copy of Feathercoin is 5 weeks behind with the transaction ledger /blockchain

alt text

So if this was your machine, you’d need to let it sync untill it’s 100% upto date, then when your mined coins get sent…you’ll see them. Why?! Because your wallet is fully upto date with the blockchain :-)

Wellenreiter

@AcidD said in New kid on the block here:

@Wellenreiter might be able to confirm how often the pool pays out.

The pool pays immediately when a block is found by the pool. You can see the expected time to find a block on the pools Page. It’s labled ‘time to block’
But as finding a block is a kind of luck, the real time to find a block can vary.

Glad you got it sorted :slight_smile:

Wellenreiter

@msxoin said in New kid on the block here:

Ok thanks a lot. Hash rate moving between 80 and 100 now.
So what happens now? Will I see the mined feathercoins in the feather program? When will they show up? I want to calculate my rate of mining, as it seems that website calclutators were terribly wrong.

You need to mine at least 2 -3 days to get a valid average number to calculate your earnings.