New P2Pool Node - East Coast USA - NO FEE!
-
@RIPPEDDRAGON said:
I am a little curious as to why I dont see a miner on your site for address:
6mJRsPuosrqK9kG5a3JuoecNxPdX1P4Lvxyet it is receiving big payouts each block…
That would be my address. The p2pool node wasn’t public.
It is now. I’m testing a few things. -
@Wellenreiter said:
@AmDD said:
Oops. so apparently when I close the putty session, P2pool closed as well, sorry. Its back up now.
are you running on linux?
Then checkout the screen program
screen -dmS P2pool ./run_p2pool.py <PARMETERS>This starts a disconnected shell.
You can connect to the shell with
screen -r P2pooland leave the screen session with
ALT-a d <CR>nice, thanks!!
Sorry for dropping the pool again. Im done playing now, I promise! :) -
@nunofsp said:
@RIPPEDDRAGON said:
I am a little curious as to why I dont see a miner on your site for address:
6mJRsPuosrqK9kG5a3JuoecNxPdX1P4Lvxyet it is receiving big payouts each block…
That would be my address. The p2pool node wasn’t public.
It is now. I’m testing a few things.Hi and welcome! Seems like we have had some decent luck today.
-
How do I set my diff for your pool?
-
@RIPPEDDRAGON said:
How do I set my diff for your pool?
Set it as part of the payment address. There is an explination here: http://xpool.net/faq.html about half way down.
I have about 1.2MH/s and I used this as a difficulty setting: address/0+0.00145
P2Pool Node: http://104.236.34.9:19327/ 0.5% fee
-
@AmDD said:
@RIPPEDDRAGON said:
How do I set my diff for your pool?
Set it as part of the payment address. There is an explination here: http://xpool.net/faq.html about half way down.
I have about 1.2MH/s and I used this as a difficulty setting: address/0+0.00145
You also can mine on the pool without specifying a difficulty setting. Based on the shares your miner submits, the pool should adapt the difficulty, if the pool version is >= 13.4-7x
Would be great, if you try it out and give a feedback.
-
@Wellenreiter said:
@AmDD said:
@RIPPEDDRAGON said:
How do I set my diff for your pool?
Set it as part of the payment address. There is an explination here: http://xpool.net/faq.html about half way down.
I have about 1.2MH/s and I used this as a difficulty setting: address/0+0.00145
You also can mine on the pool without specifying a difficulty setting. Based on the shares your miner submits, the pool should adapt the difficulty, if the pool version is >= 13.4-7x
Would be great, if you try it out and give a feedback.
Yeah it seems to jump all over the place, going up to diff 32 and then dropping suddenly down to diff 0.010 and rejecting all my shares. Hence why I want to try fixed diff. Not worried about it though, still mined almost 3k ftc yesterday lol.
-
@RIPPEDDRAGON said:
Yeah it seems to jump all over the place, going up to diff 32 and then dropping suddenly down to diff 0.010 and rejecting all my shares. Hence why I want to try fixed diff. Not worried about it though, still mined almost 3k ftc yesterday lol.
That is strange. It started at 0.1 for me and then increased up to ~ 8 and staying around that diff.
nevertheless 3kFTC per day is a lot :)
I get ~ 25 FTC per day with my 125kHash machine.
Well mining about 12-14 hours per day only… ;)
-
I was going to mention the adaptive difficulty Wellenreiter added to FTC p2pool. It’s been working great on all my tests aswell
-
went with 0+0.00300 to give me diff 12…ish
overall valid rate is up a little bit, stale % is down
-
Updated the pool to feathercoin 0.9.3. Outtage was only about 30min. Thanks to @Wellenreiter for more assistance, seriously somebody give this guy a raise! :)
-
I am so surprised with how many sites burning people we don’t see more on p2pools.
I am crushing blocks on this node, but would love to have more friends! Come join my 7+MH/s farm.
-
I agree with @RIPPEDDRAGON , that is why I’ve always supported p2pool, and such as @Wellenreiter and @Ghostlander did so much work to make sure, anyone can run a fair / open source and distributed FTC pool, especially on the Neoscrypt change over …
-
I also agree. Its one of the reasons I stuck around with Feathercoin. It always seemed like p2pool was pushed here more than another coin. Granted our hash distribution doesnt really show it with cointron controlling so much but the people in the community, the ones who really matter, are pro-p2pool and thats great!
Hash away my friends!
-
any guesses who is running the 80MH/s rig on coinotron? I feel like I need to get rigs 4 and 5 built so I can get more than 10 MH/s…
-
@RIPPEDDRAGON said:
any guesses who is running the 80MH/s rig on coinotron? I feel like I need to get rigs 4 and 5 built so I can get more than 10 MH/s…
Why not sold the parts and buy FTC directly while the price is low?
-
@mirrax said:
@RIPPEDDRAGON said:
any guesses who is running the 80MH/s rig on coinotron? I feel like I need to get rigs 4 and 5 built so I can get more than 10 MH/s…
Why not sold the parts and buy FTC directly while the price is low?
I have sold off 1/3rd of my parts so far, I am currently buying FTC with real $, and with these custom rackmount chassis costing me $550 each I am unlikely to sell off the remainder of my parts.
Mining is also a method of heating for my house every winter and will continue to heat my house as long as its cheaper to heat than oil. Even with oil at $1.55 a gallon here its still a better deal for me to mine.
-
@mirrax said:
@RIPPEDDRAGON said:
any guesses who is running the 80MH/s rig on coinotron? I feel like I need to get rigs 4 and 5 built so I can get more than 10 MH/s…
Why not sold the parts and buy FTC directly while the price is low?
@Mirrax, there is fun in mining for a miner as there is fun in trading for you :-)
-
I am sure you are sleeping and have a notification in your email but @AmDD your pool is down :)
-
@RIPPEDDRAGON said:
I am sure you are sleeping and have a notification in your email but @AmDD your pool is down :)
Thanks. Not sure whats going on. The server is online - I can SSH into it. The services are running. Let me restart them and see if that helps.
P2Pool Node: http://104.236.34.9:19327/ 0.5% fee
