P2pool feathercoin linux

wrapper

The p2pool node initially needs at least one other p2pool node to start.
When this initial connection is lost later, it may continue to work.

Yes I forgot that, another adjustment needed to implement coloured pools would be solo mining capability. Or set up two p2pools on the local network / in containers - as a work around.

Wellenreiter

@RIPPEDDRAGON said:

said:

t connect to other p2pool nodes, or yoir node cannot connect t

I dont know if you have tried manually setting your miner’s diff but this seems to help me out on p2pool:
-o stratum+tcp://104.236.34.9:19327 -O 6e3ozu798fKvNUCSwRjPMRdnrJ27dCHEPm/0+0.00300:lol

The “0+0.00300” seems to do a decent job of lowering stale % for me

That is a good way for larger miners to tune their share difficulty and reduce the negative influence on smaller miners.
I have released a new branch of p2pool software -adaptive- which does this automatically. it adjusts the individual share difficulty so that all miners submit shares about 2 times per minute.

For pool operators:

https://github.com/wellenreiter01/p2pool-neoscrypt branch ‘adaptive’
on the command line specify the parameter ‘-d A’ to enable adaptive share diffculty

@RIPPEDDRAGON : The adjustment you did is still possible with the new software, of course. It overrides the automatic adaption.

gwbraa

This post is deleted!

gwbraa

ftc.siweb.co:19327

This will be the final version!!
I will try to keep alive this node for as much I can. I will be putting some hash power as well.
Let’s see the results in one month
How Can I know the number of blocks discovered by the node?

wrapper

@gwbraa said:

ftc.siweb.co:19327

How Can I know the number of blocks discovered by the node?

There is no direct way to find that, although you can look at the explorer, this is a p2pool block :

http://explorer.feathercoin.com/block/0ccf2ac81e3cfe01fbd004fd2886e2c8e30748f232eae1b76dcb7e5da09a0aa9

you just need to use a separate address for each node, then see what comes into the wallet.

AmDD

@Wellenreiter said:

@RIPPEDDRAGON said:

said:

t connect to other p2pool nodes, or yoir node cannot connect t

I dont know if you have tried manually setting your miner’s diff but this seems to help me out on p2pool:
-o stratum+tcp://104.236.34.9:19327 -O 6e3ozu798fKvNUCSwRjPMRdnrJ27dCHEPm/0+0.00300:lol

The “0+0.00300” seems to do a decent job of lowering stale % for me

That is a good way for larger miners to tune their share difficulty and reduce the negative influence on smaller miners.
I have released a new branch of p2pool software -adaptive- which does this automatically. it adjusts the individual share difficulty so that all miners submit shares about 2 times per minute.

For pool operators:

https://github.com/wellenreiter01/p2pool-neoscrypt branch ‘adaptive’

on the command line specify the parameter ‘-d A’ to enable adaptive share diffculty

@RIPPEDDRAGON : The adjustment you did is still possible with the new software, of course. It overrides the automatic adaption.

I thought you had added the adaptive difficulty into the master branch, which is what my pool is built on. I’ll have to update to this and try it out.

gwbraa

The p2pool it’s amazing for this pool http://p2pool.neoscrypt.de/
The weird thing this wallet xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx you cannot even see their balance but their taking a nice cut with only 600K
I will keep watching this, but smells something weird. can you guys check this pool and this wallet

Wellenreiter

@AmDD said:

@Wellenreiter said:

@RIPPEDDRAGON said:

said:

t connect to other p2pool nodes, or yoir node cannot connect t

I dont know if you have tried manually setting your miner’s diff but this seems to help me out on p2pool:
-o stratum+tcp://104.236.34.9:19327 -O 6e3ozu798fKvNUCSwRjPMRdnrJ27dCHEPm/0+0.00300:lol

The “0+0.00300” seems to do a decent job of lowering stale % for me

That is a good way for larger miners to tune their share difficulty and reduce the negative influence on smaller miners.
I have released a new branch of p2pool software -adaptive- which does this automatically. it adjusts the individual share difficulty so that all miners submit shares about 2 times per minute.

For pool operators:

https://github.com/wellenreiter01/p2pool-neoscrypt branch ‘adaptive’

on the command line specify the parameter ‘-d A’ to enable adaptive share diffculty

@RIPPEDDRAGON : The adjustment you did is still possible with the new software, of course. It overrides the automatic adaption.

I thought you had added the adaptive difficulty into the master branch, which is what my pool is built on. I’ll have to update to this and try it out.

It was on the master branch vor p2pool Version 13.X already, but it got lost during the upgrade of code to version 15.
I added it again now.

wrapper

@gwbraa said:

The p2pool it’s amazing for this pool http://p2pool.neoscrypt.de/
The weird thing this wallet xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx, you cannot even see their balance but their taking a nice cut with only 600K
I will keep watching this, but smells something weird. can you guys check this pool and this wallet

Just a couple of points.
FTC is not a bank, we cannot check out pools or addresses.
There is no “smells” around FTC p2pool, it has been run and updated as an open source project virtually since it’s inception.
There is a limit on how many transactions Bitcoin-Abe can show, so addresses that have done a lot of mining show a message “too many blocks to display”, which is a “bug/issue” with Bitcoin-abe not FTC …
I have edited the Address, to prevent a FTC miner being falsely accused of “smells”

AmDD

@Wellenreiter said:

@AmDD said:

@Wellenreiter said:

@RIPPEDDRAGON said:

said:

t connect to other p2pool nodes, or yoir node cannot connect t

I dont know if you have tried manually setting your miner’s diff but this seems to help me out on p2pool:
-o stratum+tcp://104.236.34.9:19327 -O 6e3ozu798fKvNUCSwRjPMRdnrJ27dCHEPm/0+0.00300:lol

The “0+0.00300” seems to do a decent job of lowering stale % for me

That is a good way for larger miners to tune their share difficulty and reduce the negative influence on smaller miners.
I have released a new branch of p2pool software -adaptive- which does this automatically. it adjusts the individual share difficulty so that all miners submit shares about 2 times per minute.

For pool operators:

https://github.com/wellenreiter01/p2pool-neoscrypt branch ‘adaptive’

on the command line specify the parameter ‘-d A’ to enable adaptive share diffculty

@RIPPEDDRAGON : The adjustment you did is still possible with the new software, of course. It overrides the automatic adaption.

I thought you had added the adaptive difficulty into the master branch, which is what my pool is built on. I’ll have to update to this and try it out.

It was on the master branch vor p2pool Version 13.X already, but it got lost during the upgrade of code to version 15.
I added it again now.

Oh ok. Is there a table or something you can post to give us a rough idea what the settings would be at a specific hash rate? Even with setting difficulty manually on my address, i still get a lot of tiny payments. Id be happy with fewer, large payments - even so much as being paid every other day or so - if possible.

Wellenreiter

@AmDD there is a difference between the number of payouts and the number of times that shares are submitted to the pool.

You can’t influence the frequency of payouts in a p2pool, as it doesn’t store or collect coins for later payouts. whenever a block is found the 80 FTC in that block are payed out directly to the miners, according to the percentage of work they submitted to find that block.

The adaption mode or the manual difficulty adjustment only influence the frequency the miner submits shares back to the pool.

Basically faster miners get allocated larger pieces of work, so they have more to calculate before they sent back the work and get new work assigned.
In theory a miner only needs to send back work once in a round to get payed for a found block.
The automatic adaption adjusts the work, so that miners submit sares back to the pool every 30 seconds to make sure that miners have submitted work, even if the pool finds several blocks in a row.

AmDD

@Wellenreiter Well that makes sense. I thought I had read somewhere that adjusting the difficulty made for fewer, larger payouts. The worst thing about P2Pool is the tiny payouts. All that dust is a pain to deal with.

Thanks for the explanation!

lizhi

P2Pool:
http://pool.ftc-c.com:19327/static/
http://p2p.ftc-c.com:19327/static/