[Dev] Feathercoin - P2Pool-Neoscrypt - Now Available

lizhi

Today,I had test p2pool and cgminer again. I still find some problem.

GPU miner version : vehre’s cgminer 3.7.1

from https://github.com/vehre/neo-gpuminer

P2Pool version : ghostlander’s 13.4-54

from https://github.com/ghostlander/p2pool-neoscrypt

AMD Card 7850 and AMD 13.12 Catalyst + SDK 2.9

My p2pool is http://pool.ftc-c.com:10554/static/

Pool rate: 662kH/s

I think pool rate is right. :)

Issue #1:

Cgminer works abnormally and local rate always 0H/s .

If I use " --fix-protocol -o http:// " ,cgminer will not work. It say JSON error.

If I use “-o stratum+tcp” , cgminer can run , but it work abnormally, local rate= 0H/s .

my pool rate is right,it is 662K/s. local rate is 0, I think gpuminer or p2pool work abnormal.

wellenreiter01’s p2pool-neoscrypt still have some problem too. pool rate and local rate is very low.

I hope you git your codes from github, build a new pool , test again, I think you can find some error. I guess you may be miss something. :)

lizhi

Wellenreiter, my gpu-miner can mine PXC norml in your p2pool, local rate about 10K/s.

I thinl pool20.neoscrypt.de is right. so please check your https://github.com/wellenreiter01/p2pool-neoscrypt/

I guess you may be miss something.

ghostlander

If I use " --fix-protocol -o http:// " ,cgminer will not work. It say JSON error.

I have corrected this.

Getwork Fixed, Midstate Removed

lizhi

After I change SANE_TARGET_RANGE = (2**256 - 1 >> 30, 2**256 - 1 >> 12) to SANE_TARGET_RANGE = (2**256//1000000000 - 1, 2**256//1000 - 1) , cgminer can work normal ,but pool have not hashrate , Local: 0H/s .

I will try Wellenreiter’s new version on git https://github.com/ghostlander/p2pool-neoscrypt

lizhi

I have corrected this.

Getwork Fixed, Midstate Removed

I make your cgminer-neoscrypt , I have a error. can not compile success.

  CC     cgminer-cgminer.o
cgminer.c: In function 'kill_mining':
cgminer.c:3237:11: error: invalid operands to binary && (have 'int' and 'pthread_t')
cgminer.c: In function '__kill_work':
cgminer.c:3286:2: warning: implicit declaration of function 'sleep' [-Wimplicit-function-declaration]
make[2]: *** [cgminer-cgminer.o] Error 1
make[2]: Leaving directory `/D/FTC/neo2/cgminer-neoscrypt-100g'

lizhi

**P2Pool version : ghostlander’s 13.4-54 **https://github.com/ghostlander/p2pool-neoscrypt

**GPU miner version : vehre’s cgminer 3.7.1 , **AMD Card 7850

Test Failure

If I use “SANE_TARGET_RANGE = (2**256 - 1 >> 30, 2**256 - 1 >> 12)” in p2pool/bitcoin/networks/phoenixcoin.py , p2pool always display " Accepted d94ffdc3 Diff 145/-2147483648 GPU 1" , This is a abnormally informtion.

local rate is 0, I think gpuminer or p2pool work abnormal.

If I use “SANE_TARGET_RANGE = (2**256//1000000000 - 1, 2**256//1000 - 1)” in p2pool/bitcoin/networks/phoenixcoin.py , p2pool display " Accepted 329bea3e Diff 3/1 GPU 1 ", This is a right .

But Local rate is 0 still , p2pool always display " Worker PfF9PKBjkmz7gFAkA7h6ajY5AHc9B1mijW submitted share with hash > target: " .

p2pool can not work ,mine pxc failure.

ghostlander

Your MinGW doesn’t declare sleep() and pth descriptors. My one does. See the last patch for Windows 64-bit and revert those changes you need.

lizhi

**Wellenreiter’s p2pversion : 13.4-34-g1eb6d7b-dirty **https://github.com/wellenreiter01/p2pool-neoscrypt/

CAN WORK WITH A ISSUE

If I use “SANE_TARGET_RANGE = (2**256 - 1 >> 30, 2**256 - 1 >> 12)” in p2pool/bitcoin/networks.py , can not work too .

If I use “SANE_TARGET_RANGE = (2**256//1000000000 - 1, 2**256//1000 - 1)” in p2pool/bitcoin/networks.py , p2pool can work, cgminer can work normal.

But have a problem only , p2pool display "local rate is very low ". cgminer display 20K/s , but pool display about 400H/s only. :-[

Wellenreiter

Strange thing is, that cpuminer works fine for me’ while gpu miner get’s very low hashrates on the pool only

I wil investigate further.

lizhi

Strange thing is, that cpuminer works fine for me’ while gpu miner get’s very low hashrates on the pool only

I wil investigate further.

Further examination

I find my cpu miner work normal ,their hashrate is about 3K/s , correct .

Only gpu miner’s hashrate is very low, about 400H/s. When they work at the same time, cpu miner work normal, but gpu miner can not work.

I think your gpu miner too on pool.ftc-c.com:10554

When they work at the same time, cpu miner work normal, but gpu miner can not work.

cgminer 3.7.1 Look normal

Wellenreiter

Gpuminer 3.7.0 is working fine for me on p2pool.neosrypt.de:10554
With 3.7.1 low hashrates of ~400 hash/sec is seen by the pool.

lizhi

Gpuminer 3.7.0 is working fine for me on p2pool.neosrypt.de:10554
With 3.7.1 low hashrates of ~400 hash/sec is seen by the pool.

my miner 3.7.4exp is Ph5Cy7cGhF3qW14cD6w8DJcSVPrLmX4Goa ,it is working on your pool20.neoscrypt.de

It look normal , have 20K/s hashrate.

how to fix your p2pool ?

Wellenreiter

mining at ~ 35 khash on p2pool.neoscrypt.de with gpumminer 3.7.5 , what is comparable to the hashrates the miner reports :)

I pulled the latest p2pool code and currently test it on a private node.

I will push that code as soon as the tests are finnished.

Wellenreiter

A new version of the p2pool is available on Github.

Changes:

import of latest master code with significant code changes
adaption to Ghostlanders pools, so the pools now can fully connect to each other and build a common pool.
tested with cpuminer and the latest version of gpuminer.
longpoll and stratum are supported

MrSheep

Updated p2pool.maeh.org. Looks good. Orphan rate reduced significantly from my point of view.

lizhi

Yes , the new version of the p2pool is available :)

since 24 hours , I work normal

MrSheep

Greetings!

The p2pool on p2pool.maeh.org still seems very stable. There are now 4 active miners and the efficiency is quite high in comparison to earlier versions (95% in comparison to around 50% earlier).

As i like statistics, i have started to create some p2pool statistics and also have a list of PXC p2pools at http://crypto.maeh.org/p2pools_pxc.html

Regards,

MrSheep

cisahasa

i cant get phoenix to connect, feathercoin connects with same settings(win7)

what im missing?

defaultkey=1
dns=1
server=1
daemon=1
listen=1
rpcport=9554
port=9555

rpcuser=xxx
rpcpassword=yyy

2014-10-14 17:44:00.069000 P2Pool (version unknown 6e6e6e)
2014-10-14 17:44:00.131000
2014-10-14 17:44:00.131000 Testing daemon RPC connection to ‘http://127.0.0.1:95
54/’ with username ‘xxx’…
2014-10-14 17:44:01.161000 > Error while checking the daemon connection:
2014-10-14 17:44:01.161000 > Traceback (most recent call last):
2014-10-14 17:44:01.161000 > Failure: twisted.internet.error.ConnectionRefusedEr
ror: Connection was refused by other side: 10061: No connection could be made be
cause the target machine actively refused it…

Wellenreiter

How long did phoenixcoind run on your system before you started the p2pool?

Phoenixcoind needs to sync the full blockchain, before it strts listening on the ports 9554 and 9555, so a pool or miner can connect.

on Windows you can open a cmd window and use the netstat command to get information about listening ports.

type ‘netstat /h’ for explanation of options

You can find a known working version of p2pool here: https://github.com/wellenreiter01/p2pool-neoscrypt/archive/master.zip

cisahasa

chain is up to date.

i have absolute similar settings with feathercoin neofork client and that works just fine

im using qt with daemon=1 option in config, used the official and compiled my own, no help

should i compile only daemon?

i got errors when trying it