[Dev] NeoScrypt GPU Miner - Public Beta Test
-
I’ll try 14.2 as well. I just tried 14.6 AMD OCL DLLs and they are significantly faster than 14.4 on my 290x.
14.200.1004 is 14.7rc3 or some older
-
14.200.1004 is 14.7rc3 or some older
Thank you for the clarification.
-
I will put together new archives with faster AMD OCL DLLs for the 14.9.x fix. Hang tight.
-
OK, I uploaded archives containing faster AMD OCL DLLs.
Refer to my prior post for new links and instructions.
-
seems like day work is done, time to sleep
-
Sleep is for the weak! :P
So I tried using 14.7 RC1 AMD OCL DLLs, and they were plenty fast, but still not quite as fast (on my 290x) as 14.6 RC2 AMD OCL DLLs.
-
Sleep is for the weak! :P
So I tried using 14.7 RC1 AMD OCL DLLs, and they were plenty fast, but still not quite as fast (on my 290x) as 14.6 RC2 AMD OCL DLLs.
on my set up 14.7rc3 is best, (arent they same driver as 14.6rc2?) 14.6rc2 only 1-2% slower, else drivers are way slower
and the bonus!! old nvidia +100%
-
Just for grins, I’m running the 14.4 OCL’s on catalyst 13.25 (tried updating the drivers twice from 13.25 to 14.6, and they remained 13.25)
Got my 290’s up to 212k, and the 290x’s at 199k.
-
14.6 RC2 driver dlls gave me some +20 khs increase over the 14.6 ! Lets see which drivers give the most
-
Just for grins, I’m running the 14.4 OCL’s on catalyst 13.25 (tried updating the drivers twice from 13.25 to 14.6, and they remained 13.25)
Got my 290’s up to 212k, and the 290x’s at 199k.
I am running AMD Catalyst 14.9.2 Beta with the 14.6 RC2 OCLs and my 290x is getting 320 Kh/s. You might want to upgrade drivers to get that extra 100 Kh/s out of your 290x.
Also,
AMD HD7950 (Hynix) 274 Kh/s
AMD HD7870 (Elpida) 116 Kh/s
AMD HD7850 (unknown) 120 Kh/s
-
14.7rc3
280x 290khs hynix,
280x 265khs elpida
-
Workisze must be 64, or a multiple of.
-
64 seems best with i 13
-
If there is any speed difference between 14.7 RC3 and 14.6 RC2 while running 14.9.x it’s so minute that I can’t even tell.
-
I am running AMD Catalyst 14.9.2 Beta with the 14.6 RC2 OCLs and my 290x is getting 320 Kh/s. You might want to upgrade drivers to get that extra 100 Kh/s out of your 290x.
Also,
AMD HD7950 (Hynix) 274 Kh/s
AMD HD7870 (Elpida) 116 Kh/s
AMD HD7850 (unknown) 120 Kh/s
Managed to get ~240k on the 290’s and 220k on the 290x, upping to the 14.9 drivers now and see how that goes.
-
I want to thank both Wolf and insanid for all of the help they have given. I think it is great that Wolf is sharing his work with everyone, given that mining can be a very competitive endeavor and that insanid has been so helpful getting everyone up and running. I learned a few new tricks today and have gained much more appreciation towards what goes into optimizing mining.
Thanks again
-
I want to thank both Wolf and insanid for all of the help they have given. I think it is great that Wolf is sharing his work with everyone, given that mining can be a very competitive endeavor and that insanid has been so helpful getting everyone up and running. I learned a few new tricks today and have gained much more appreciation towards what goes into optimizing mining.
Thanks again
You’re welcome :) I feel that with Neoscrypt mining has been given back to the hands of enthusiasts, and seeing how the average person can now mine again, we all should help each other out.
-
Well with the 14.9 installed and the 14.4 pack from here, trying intensities from 11 to 16 and all sorts of combinations, I managed to come up with 255k on the 290’s with 3 different combinations of settings and 245k on the 290x’s with one, 240 with another, and 235 with the 3rd of the settings that did 255k on the 290’s…
290’s = hynix
290x’s = elpida
Back at it tomorrow… >:D
BTW wolf0 said work should be a multiple of 64, I’ve found multiples of 32 give me the best results. (IE: 96 beats 64 in many cases)
-
Epic… This is working out well!
-
I found a -w 112 also works well for me, picked up 4-5 kh per card