[Dev] NeoScrypt Hardware Comparison Site
-
You are using the wrong tool to show proof. You are using the GPU Caps Viewer, instead of GPU-Z as requested. GPU-Z shows more info, including the ability to read the sensors on your card.
ok i’ll use it now
thank’s
-
Added those now, is the 290 beating the 290x because of the memory type? seems pretty interesting to see how different memory types can effect things alot, perhaps timings have something to do with it.
That is correct, they are both bottlenecked by using wolf’s next oldest kernel because I cannot get the latest one running, but the Hynix vs Elpida memory thing is the single factor in the difference in speed, as they are both using settings very close to each other to get those speeds. Which is why I included the memory type.
When the newest kernel is released in a working windows build, those will have to be edited as they should both see a minimum15% increase in speed. 8)
-
Elpida memory must be pretty bad to be that much slower wow xD
Both my 660ti and 770 have hynix, and ive noticed that the memory clock has the biggest effect on hashrate, pulling my 660ti from 1175 core to 1333 barely sped it up by 1kh/s, but pushing the ram from 1503 to 1775 made it shoot up by about 4-5kh/s
Now to see what i can get outa my asus 770 (still waiting for the rest of my watercooling setup so i can swap out my 660ti)
Could probably try overclocking my i7 more and testing out how fast i can get that going on all 8 threads, and give the 660ti a rest (poor things being hammering away for the past 2 weeks straight lol)… i can get this i7 stable at 5ghz (im a lucky ducky) but it does require a lot of overvolting and a lot of cooling, hopefully watercooling will remedy that (as i said still waiting for some parts)
Note: has noone got AMD cpus? Could do with some of those being submitted to the site! That E1-1200 is sitting there all on its own… lonely thing :p
-
My mining rig has an AMD 8350 CPU, but that’s currently (and always) occupied by mining 4 GPU’s and 6 ASIC devices…
And the Intel Q9600 in this workstation is busy running a browser and wallets and emails… And really pushing this box at all tends to display this funny blue screen with white lettering that basically says “ha ha, I’m going to reboot now, so screw whatever you were doing” so I tend not to push it a lot…
I did at one time mine a couple cores of each of those on neoscrypt, here is the results:
-AMD 8350 (8 core) black running stock clock gets 1.63 kh/s per core.
-Intel Q9660 (quad core) unlocked running stock clock gets 1.32 kh/s per core.-ramping up to 3/4 the cores in both CPU’s held the per-core hashrate shown
The wife is due for a PC upgrade, an AMD APU might be going in there. :)
-
My mining rig has an AMD 8350 CPU, but that’s currently (and always) occupied by mining 4 GPU’s and 6 ASIC devices…
And the Intel Q9600 in this workstation is busy running a browser and wallets and emails… And really pushing this box at all tends to display this funny blue screen with white lettering that basically says “ha ha, I’m going to reboot now, so screw whatever you were doing” so I tend not to push it a lot…
I did at one time mine a couple cores of each of those on neoscrypt, here is the results:
-AMD 8350 (8 core) black running stock clock gets 1.63 kh/s per core.
-Intel Q9660 (quad core) unlocked running stock clock gets 1.32 kh/s per core.-ramping up to 3/4 the cores in both CPU’s held the per-core hashrate shown
The wife is due for a PC upgrade, an AMD APU might be going in there. :)
for an AMD apu i’d reccomend the A10-7850K, that thing is pretty impressive! and plenty of ram really lets it fly, my friend recently got one in his machine, he can even run some games at 1080p at mid-high settings!
thanks for giving me some info for CPUs :P however the comparison site also needs memory amount/type/channel/speed, so if you could get those that would be great!
if you could submit the details on the site, would be even more awesome :D
-
############### Update ###############
ACP login page complete, and actually works! (after 6 hours straight sat at my laptop)
Logging out also works!
It’s as secure as i can make it right now (no plaintext passwords are used huehue), with session id which is checked based on ip when navigating to any page on the ACP, i will look into making sessions time limited aswell (more security… hehe).
############### Thanks ###############
Sydney
-
GPU - Intel
lol, get rid of this :)
Site is looking good, better with every entry
-
GPU - Intel
lol, get rid of this :)Site is looking good, better with every entry
Haha, yeah, i was maybe hoping people would test out the onboard hd2500/4000 chips and above, my i7’s hd4000 gets 18mh/s for sha256, was wondering what it would manage for neoscrypt :P ill try give mine a run today, but if its that crappy ill just remove them all together :P
-
GPU - Intel
lol, get rid of this :)
Site is looking good, better with every entry
adding my i7’s HD 4000!
manages 8.1kh/s at just 11.7w! (1150mhz) not bad for a little intel chip!
might even try overclocking it to the sky… let’s see how fast it can go (i recon 1700mhz is possible on this thing hehe)
EDIT: 10.3kh/s at 15.7w (1500mhz) … losing a bit of efficiency, but let’s try for that 1700… hehe
EDIT 2: 11.68kh/s at 17.3w (1700mhz) … pushing any higher runs into endless hardware errors, and i dont wanna push more voltage into it as its already at +0.3v and i dont wanna kill it lol, if i can run it alongside my cpu and 660Ti, then ill be hitting around 69 kh/s (lol)
EDIT 3: just realised it’s actually pretty efficient (around 650h/w) compared to most GPUs in the table (bar the 280x/290/290x), which is actually rather impressive for an intel GPU!
-
Page not found (404) on the main link and the ‘acp’ link.
‘New’ link times out.
-
Works fine for me last i checked, let me see
Edit: still works fine for me, if you’re on windows, open cmd and enter “ipconfig/flushdns” (without quote marks), that should fix it. I moved the box that its hosted on so the dns may not have refreshed yet
-
It’s working for me now as well, without the flush.
Fun times tomorrow, 3 of the GPU’s in the test results are coming out to get RMA’d… The 2 Sapphire 290’s for fan failures, and one of the XFX just got sick and died with no warning whatever. SGminer showed card as sick, then went to dead. Restarted SG, and the computer locked up hard. On reboot, card not detected.
That gives me an HIS 280x to try to outrun my XFX 290x POS…
-
Well, success!! (of a sort)
I managed to get the HIS 280x (GPU 0) to hash faster (303 khs) than I’ve been able to get the XFX 290x to hash reliably (GPU 1 & 2 @ 301 khs)…
When I get the 280x to max speed, I’ll upload the stats and proof to the site, but there never be another XFX GPU in my future.
– edit – up to 307k
-
The 280x may be hashing faster than the 290x simply because of memory manufacturer, the hynix memory seems to allow miners to hash a lot lot faster than with elpida memory, perhaps this is due to differences in memory timings (seems most likely) but if you wish to get the highest hashrate out of a gpu, try to get hynix memory
I’ve been testing a couple of older AMD cards, and in general it seems the newer and faster the card, the better, i have a HD 5670 (picked up for £10 as fault off ebay, just needed a clean as the fan/heatsink were locked solid with some disgusting looking brown/yellow dusty stuff), with sha256 it is comparable to my 660Ti (about 100Mh/s) but in neoscrypt it really does kinda suck… only hitting 7kh/s after tweaking it for several hours, where my 660Ti gets 24kh/s at stock and up to 34kh/s after tweaks
funnily enough the HD 5670 i have is from XFX :P still holding strong with its 7kh/s so far (hits 74c, but the fan doesnt go up on its own, it stays at 25% unless i set it to something with sgminer startup config
soon im gonna be out on hols for 2 weeks, maybe more, do you recon i should perhaps downclock my cards slightly to reduce the chance of any crashes? hopefully i can get it to last 2 weeks solid without a crash
-
############### Update ###############
Been testing a new style for the site, you may check it out here;
http://hw.neoscrypt.tk/index2.php
currently i cannot get the in-page links to go below the header block (which is rather annoying tbh) so if anyone knows how i could fix that, would be awesome!
please comment on what you think of this style and any changes that could/should be made to it (there are probably quite a few)
note: the tables wont look like that with white/thick-ish borders, they will be made more clean
############### Thanks ###############
Sydney
-
Nice , SpartanC001 . If you need help,please PM to me . I can give some hardware comparison to you. soon
-
Yes, the 280x also has hynix, and that is part of why it beats the XFX. But XFX made a choice to put that cheaper memory in their card, yet charge the same price for it as other cards that have better memory. So I am making the choice to never buy another XFX card. :P
Yes, clock back your cards to where they will be rock solid stable if you are going to leave them unattended for 2 weeks.
And the new style is much easier to read than the old style!!
-
Nice , SpartanC001 . If you need help,please PM to me . I can give some hardware comparison to you. soon
If you know how to fix the in-page links (they currently make the content go up under the header) please let me know :D
Yes, the 280x also has hynix, and that is part of why it beats the XFX. But XFX made a choice to put that cheaper memory in their card, yet charge the same price for it as other cards that have better memory. So I am making the choice to never buy another XFX card. :P
Yes, clock back your cards to where they will be rock solid stable if you are going to leave them unattended for 2 weeks.
And the new style is much easier to read than the old style!!
I generally stick with ASUS or Gigabyte cards, ive never had an issue with gigabyte, and their windforce coolers are great, 660Ti tops out at 70c if i turn the fan to min, and 57c if i put fan at max, and is silent compared to my i7’s stock cooler lol
Asus i find have better performing cards, ive not had an issue with an asus gpu, although i had a motherboard have its built in audio crap out, i didnt request a replacement as i already had a sound card for it anyway, but they gave me a refund which was nice
As for the style, im trying to keep it non blocky, and ill be changing it about a bit more tonight with rounded borders for tables and stuff
-
############### Update ###############
Been testing a new style for the site, you may check it out here;
http://hw.neoscrypt.tk/index.php
currently i cannot get the in-page links to go below the header block (which is rather annoying tbh) so if anyone knows how i could fix that, would be awesome!
please comment on what you think of this style and any changes that could/should be made to it (there are probably quite a few)
note: the tables wont look like that with white/thick-ish borders, they will be made more clean
############### Thanks ###############
Sydney
############### Update ###############
Just updated the style some more, looking a bit better i think!
http://hw.neoscrypt.tk/index.php
Please comment how you think this looks!
############### Thanks ###############
Sydney
-
I like it, but there is to much grey dots blinking (white lines crossings)
